MEMS Optical Switch (1×1 1×2 2×2)
ANFiber’s MEMS Multi-Mode and Single mode 1×1 1×2 2×2 Optical Switch is a optical path control device that has one or two fiber inputs and one or two fiber outputs, and can be switched to one of two configurations.This fiber optical switch utilizes microelectromechanical system (MEMS) technology to achieve reliable optical performance and excellent durability.1×1 1×2 2X2 MEMS Optical Switch features low insertion loss,fast response time,and extremely high reliability.
- Description
- Reviews (0)
Description
ANFiber’s MEMS 1X1 1X2 2X2 Fiber Optical Switch are fast,MEMS switches available both for single mode and multimode fibers.It utilizes the proprietary microelectromechanical system (MEMS) technology to achieve reliable optical performance and excellent durability.MEMS Optical Switches are available in configurations from 1×1 1X2 2X2.These switches are mainly used in test and measurement applications.
Applications of MEMS Optical Switch:
Optical Reconfiguration
Network Restoration
Protection Switching
Optical Subsystems
Array integration
Features of MEMS Optical Switch:
Low Insertion Loss
Response Time:SM:0.5ms MM:2ms
Single Mode and Multi-Mode Fiber
latching or non-latching
reliable,miniature size
Specifications of MEMS Optical Switch:
| Parameter | Single Mode(1×1 1×2 2×2) |
| Wavelength range (nm) | 1240~1640 |
| Insertion loss (dB) | ≤1.0 (Typ 0.4) |
| Crosstalk (dB) | ≥ 60 (Typ 75) |
| Return loss (dB) | ≥ 50 (Typ 55) |
| Polarisation Dependent Loss (dB) | ≤0.07(Typ 0.03) |
| Repeatability (dB) | ≤0.002 |
| Switch time (ms) | ≤1 (Typ 0.5) |
| Durability (cycles) | 109 |
| Supply Voltage Vcc (pin 1) ( V ) | 3.2 ~ 5.25 (Type: 3.3 or 5 ) |
| Current Consumption Icc (pin 1) ( mA ) | ≤45 (Typ 1) |
| Logic Level Low (pins 3, 4) ( V ) | Max: 0.3 |
| Logic Level High (pins 3, 4) ( V ) | ≥3.0 |
| Selection Pulse Width ( ms ) | ≥ 2 Type: 10 |
| Operation temperature(℃) | 0~70 |
| Storage temperature (℃) | -40~70 |
| Package Size (L x W x H) (mm) | 23.2 x 10.1 x 5.9 |
| Parameter | Multi-Mode (1×1 1×2 2×2) |
| Wavelength range (nm) | 600~1700 |
| Insertion loss (dB) (measured at 1300nm) | ≤1.2 (Typ 0.4) |
| Crosstalk (dB) | ≥ 40 (Typ 60) |
| Return loss (dB) | ≥ 30 (Typ 40) |
| Repeatability (dB) | ≤0.005 |
| Switch time (ms) | ≤20 (Typ 2) |
| Durability (cycles) | 109 |
| Supply Voltage Vcc (pin 1) ( V ) | 3.2 ~ 5.25 (Type: 3.3 or 5 ) |
| Current Consumption Icc (pin 1) ( mA ) | ≤45 (Typ 1) |
| Logic Level Low (pins 3, 4) ( V ) | Max: 0.3 |
| Logic Level High (pins 3, 4) ( V ) | ≥3.0 |
| Selection Pulse Width ( ms ) | ≥ 2 Type: 10 |
| Operation temperature(℃) | 0~70 |
| Storage temperature (℃) | -40~70 |
| Package Size (L x W x H) (mm) | 23.2 x 10.1 x 5.9 |
Order information:ANFIBER-A-B-C-D-E-F-G
| A | B | C | D | E | F | G |
| Type | Wavelength | Control Model | Fiber Length (m) | Fibre type | Fiber diameter | Connector |
| 1×1
1×2 2×2 Specify Custom |
1=850nm
2=1310nm 3=1490nm 4=1550nm 5=1625nm 6=1310/1550nm 7=850/1310nm S=Specify Custom |
L=latching
N=non- latching |
0.5=0.5m
1.0=1.0m 1.5=1.5m S=Specify Custom
|
9=SMF28,9/125
50=MM 50/125 62=MM 62.5/125 S=Specify Custom |
1=250um bare fibre
2=900um loose tube 3=2.0mm loose tube S=Specify Custom |
OO: None
FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC SP: ST/PC SA: ST/APC LP: LC/PC LA: LC/APC X: Others |
Please provide the correct P/N code in the order information when you inquire about MEMS 1X1 1X2 2X2 Optical Switch.
Please provide detailed description if you need custom it.
Please contact us:[email protected],we wish to cooperate with you.thanks!
Reviews
There are no reviews yet.